Chipright
Guelph, ON, Canada
Hardware Component Engineer Experience Required: The candidate should have experience in some or all of the following areas: Low-power circuits, DC/DC converters, power management methods, analogue circuits and mixed-signal circuits. Processors, digital circuits and embedded systems. Sourcing, evaluating & selecting components f
Job Source: ChiprightChipright
Guelph, ON, Canada
R&D Project Engineer with LabVIEW experience Salary: Very Attractive Rate Location: N/A R&D Project Engineer with LabVIEW experienceWe are looking for an experienced R&D engineer with a background in instrumentation, with relevant hands-on experience building and / or verifying measuring instruments. You will join the systems team, where you w
Job Source: ChiprightChipright
Guelph, ON, Canada
R&D Project Engineer with LabVIEW experience Salary: Very Attractive Rate Location: N/A R&D Project Engineer with LabVIEW experienceWe are looking for an experienced R&D engineer with a background in instrumentation, with relevant hands-on experience building and / or verifying measuring instruments. You will join the systems team, where you w
Job Source: ChiprightLinamar Corporation
Guelph, ON, Canada
Design Engineer The Design Engineer position, under general supervision, will be responsible for designing new products and processes and improving and maintaining existing products. May conduct design analysis on components and/or assemblies to assist in the development process by ensuring designs are cost efficient, manufacturable, and reliable.
Job Source: Linamar CorporationCpus Engineering Staffing Solutions Inc.
Ajax, ON, Canada
We are requesting resumes for the following position: Design Engineer Resume Due Date: Wednesday, May 24th, 2023 (5:00PM EST) Number of Vacancies: 1 Level: MP4 (Senior) Duration: 2 years Location : 230 Westney Road South, Ajax Hours: up to 35 hours per week Job Overview Work as a Design team Lead (DTL) or Electrical Design Engineer (DE) p
Job Source: Cpus Engineering Staffing Solutions Inc.Cpus Engineering Staffing Solutions Inc.
Pickering, ON, Canada
We’re currently requesting resume for the following position: Design Engineer Closing Date: Monday, April 10th, 2023 Job Level: Senior Work Location: Pickering (in office), with occasional travel to site for meetings/walkdowns Number of Vacancies: 5 Electrical / I&C: 2 Mech: 2 Civil: 1 Hours of Work: 40 hours per week Contract Durati
Job Source: Cpus Engineering Staffing Solutions Inc.Chipright
Guelph, ON, Canada
Analog/mixed-signal IC circuit design, simulation and verificationwith experience in a range of analog and mixed signal circuits e.g. amplifiers, comparators, oscillators, ADCs and DACs. Ideally previous experience with power management and switched power mode supply ICs . Experience with silicon design and debug on deep submicron process e.g. 40nm
Job Source: ChiprightUniversity of Utah
Ajax, ON, Canada
The Office of Research Information Systems is seeking a Software Developer. The Software Developer will provide a primary role in the development and support of research applications. The primary application, the Electronic Research Integrity & Compliance ( ERICA ) System, is developed from the Huron Click Research Suite for use in Conflict of Inte
Job Source: University of UtahGuelph, ON, Canada
$ 80.000 - 100.000
Hardware Design Engineer with Lab Eval Experience Salary: Very Attractive Rate
Location: N/A
Full Time
Hardware Design EngineerExperience Required:The candidate should have experience in some or all of the following areas: Low-power circuit design, DC/DC converters, power management methods, and analogue design and mixed-signal board-level design.
Processor architecture, digital circuit design and embedded systems.
Sourcing, evaluating & selecting components for new & established designs
Various communications protocols such as I2C, UART, SPI, USB.
Familiarity with RF technology - antenna design, impedance matching, performance tuning of RF circuits – 345MHz, 433MHz, 868MHz, 2.4GHz
Experience integrating RF technologies such as Zigbee, Zwave, WIFI, BlueTooth.
Leading and driving design development from schematic capture, PCB layout through assembly, and test house validation
Robust designs for ESD/EMI immunities and RF de-sensitisation.
Partnering with software teams to define and implement firmware, drivers and algorithms
Additional Requirements: The Successful candidate should also: Have an honours degree, or post graduate qualification, in Electronic Engineering
6+ years of experience in consumer product design, including circuit design, component engineering, integration, embedded systems, and debugging
Have strong leadership skills and the ability to communicate effectively with a diverse set of stakeholders across multiple disciplines
Have strong communication and documentation skills and ability to operate autonomously
Have a good understanding of manufacturing process including DFM and DFT for consumer products
Have a good working knowledge of the technical concepts involved in the development of products and processes
#J-18808-Ljbffr